Bosch dishwashers troubleshooting
Use the symptom or code to choose a safe starting point for Bosch dishwashers. Verify the exact model before maintenance.
Separate filling, washing, draining and drying.
Food residue, standing water and clean-but-wet dishes need different checks. For a code, use the exact brand and appliance type before following a procedure.
SHEM63W55N not draining: E24 and the drain path
The SHEM63W55N owner manual documents the filter and accessible pump-cover arrangement.
Follow the checksSHPM65Z55N AutoAir door is not opening
The SHPM65Z55N is an AutoAir model, not a CrystalDry model.
Follow the checksSHPM78Z55N CrystalDry not drying: check the cycle
The SHPM78Z55N uses CrystalDry.
Follow the checksBosch E24 after cleaning the filter
E24 after filter cleaning means the rest of the drain outcome still needs checking.
Follow the checksBosch E25 after cleaning: check the pump cover
If E25 first appears after maintenance, the pump-cover fit is a relevant documented branch.
Follow the checksBosch E15 but no water is visible on the floor
E15 concerns water detected in the concealed base; a dry floor does not clear that condition.
Follow the checksBosch E22 remains after filter cleaning
Bosch’s dedicated short-code E22 page identifies a filter blockage.
Follow the checksBosch dishwasher drain troubleshooting by code and model
A clear filter does not establish that the whole drain system is unobstructed.
Follow the checksBosch dishwasher cleaning results: choose a path
When food remains after a completed Bosch wash, separate loading and filtration from drainage or drying complaints.
Follow the checksBosch drying troubleshooting: identify the drying system
If dishes are clean but wet, Bosch recommends checking loading space and rinse aid.
Follow the checksSHP65CM5N Rinse Cycle: Save It to Favorite
The missing Rinse button is a cycle-access question.
Follow the checksSHP65CM5N Stuck on a Cycle: What Reset 4 Sec. Does
On the SHP65CM5N, the control marked Reset 4 sec.
Follow the checksSHP65CM5N Rinse Aid Setting: Spots Versus Streaks
The SHP65CM5N uses LED levels for rinse-aid dosage rather than the r:05 menu shown in many older Bosch guides.
Follow the checksSHP65CM5N End-of-Cycle Beep: Change the Signal Level
The SHP65CM5N has a four-level signal-volume setting.
Follow the checksSHX78CM5N PowerControl: Why All Four Zones Are Active
On the SHX78CM5N, custom lower-rack zones are configured in Home Connect.
Follow the checksSHX78CM5N Remote Start Stops After Opening the Door
Opening the SHX78CM5N door automatically deactivates Remote Start in the button-selected operating mode.
Follow the checksSHX78CM5N Delay Start: Use the App, Not a Missing Key
The SHX78CM5N manual routes the time-delay function through Home Connect.
Follow the checksSHXM4AY55N InfoLight Is Missing: Off, Hidden or Faulty?
The SHXM4AY55N uses a floor spot called InfoLight, not a projected time display.
Follow the checksSHE3AR75UC Shows CL: Unlock the Cycle Controls
For the SHE3AR7xUC manual family, CL identifies Child Lock.
Follow the checksSPX68B55UC Express Leaves Dishes Wet: Compare the Cycle
The SPX68B55UC manual lists Express as a 30-minute program whose sequence ends with the final rinse, unlike programs that list a drying phase.
Follow the checksSHPM65Z55N Flashing Start: Check the Four-Second Door Window
The SHPM65Z manual pauses operation if the door remains open more than four seconds after Start.
Follow the checksSHPM65Z55N Delay Start Will Not Clear: Use the Zero Setting
The SHPM65Z55N manual cancels Delay Start by returning the delay display to zero and saving with Start.
Follow the checksSHE53C85N Four Lights: Steady and Flashing Mean Different Things
The SHE53C85N manual distinguishes four vertical LEDs steadily illuminated from those same LEDs flashing.
Follow the checksSHX89PW75N Interior Light Is Off: Check EmotionLight State
The SHX89PW75N family manual says EmotionLight is on with the door open, off with it closed, and automatically switches off after an hour with the door open.
Follow the checksBosch Dishwasher E06 Returns After Reset: Keep the Door Sensor Intact
Bosch US identifies E06 as a door-sensor circuit fault.
Follow the checksBosch E07 but the Dishwasher Still Drains: Check the Code Scope
For Bosch US CrystalDry guidance, E07 concerns the zeolite drying fan.
Follow the checksBosch Dishwasher E10: CrystalDry Chamber Versus Wash Heating
Bosch US assigns E10 to the zeolite/CrystalDry chamber heater.
Follow the checksBosch E12 After Descaling: What the Remaining Code Tells You
Bosch describes E12 as limescale in the heat pump and directs descaling.
Follow the checksBosch E14 Even Though Water Enters: Flow Is Not the Whole Check
Bosch describes E14 as a flow-meter or filling-system problem.
Follow the checksBosch E16 or E17 After Installation: Check the Supply Context
Bosch US groups E16 and E17 as water-inflow/filling-system issues.
Follow the checksBosch Dishwasher E18 With the Water Supply On
E18 in Bosch dishwasher guidance concerns insufficient water flow or fill.
Follow the checksBosch E19 Even When the Dispenser Opens: Do Not Guess the Part
Bosch US identifies E19 as a detergent-dispenser solenoid circuit fault.
Follow the checksBosch E27 Keeps Returning: When to Call an Electrician
Bosch US describes E27 as low household supply voltage.
Follow the checksBosch E6160: PowerControl Cannot Find Its Reference Position
Bosch US defines E6160 as a PowerControl lower-spray-arm reference-position fault and directs the owner to support.
Follow the checksBosch E23 After Cleaning the Filter: What Is Still Unproven
Bosch describes E23 as a drain-pump issue that can involve blockage, clogging or a fault.
Follow the checks