Dryers troubleshooting
No heat, warm-but-wet laundry and an early Sensor Dry ending are different starting points. Identify electric, gas or heat pump before using a supply checklist.
Is it cold, slow, or stopping early?
No heat, warm-but-wet laundry and an early Sensor Dry ending are different starting points. Identify electric, gas or heat pump before using a supply checklist.
DV40J3000EW/A2 tumbles but has no heat
The electric DV40J3000EW/A2 has an unheated Air Fluff setting and a separate Time Dry selection.
Follow the checksDV42H5000EW/A3 Sensor Dry ends early
On the DV42H5000EW/A3, Sensor Dry ends according to the selected dryness while TIME DRY lets you choose minutes.
Follow the checksDV45H7000EW/A2 Child Lock: buttons will not respond
The documented DV45H7000EW/A2 Child Lock action is to hold Temp.
Follow the checksDVE50M7450W/A3 vent blockage test and results
This model’s documented vent test begins with a cool dryer and an empty drum.
Follow the checksMEDC465HW keeps tumbling after the cycle ends
Maytag’s MEDC465HW feature sheet describes Wrinkle Control as 40 minutes of additional no-heat tumbling after drying.
Follow the checksGTD42EASJ2WW runs without heat: control comparison
The GE manual linked from the GTD42EASJ2WW parts page distinguishes unheated Air Fluff/No Heat and Quick Fluff from heated operation.
Follow the checksDLEX4000W d80: Flow Sense and the installation check
On the DLEX4000W, a Flow Sense warning directs attention to exhaust restriction.
Follow the checksSamsung dryer dC with the door closed
A closed-looking door can still be unrecognized.
Follow the checksSamsung dryer HC after the vent was cleaned
If HC returns after vent cleaning, record what was actually cleaned: the screen, transition or entire house route.
Follow the checksSamsung dryer tC after cleaning the lint filter
Cleaning the lint screen does not establish that the whole exhaust path is clear.
Follow the checksSamsung dryer not heating: electric, gas or airflow?
First identify whether the dryer is electric, gas or a different drying system, then distinguish no heat from warm-but-damp laundry.
Follow the checksSamsung Sensor Dry ends early: choose the right check
When Sensor Dry ends normally but laundry is still damp, compare it with a suitable timed cycle.
Follow the checksWhirlpool dryer heating and drying troubleshooting
Choose the branch by fuel type and actual result: cold throughout, warm but slow, or a stationary drum.
Follow the checksWhirlpool ventless and heat-pump drying checks
A heat pump dryer needs its own maintenance path.
Follow the checksDVE45R6100W Smart Care: Why Wi-Fi Pairing Does Not Work
Smart Care reads a displayed diagnostic code with a phone camera.
Follow the checksDVE50R5400V: Water Drips When Steam Care Starts
The model-family troubleshooting table allows brief nozzle dripping as Steam Care starts: condensed steam can emerge as water.
Follow the checksDVE55A7300E Damp Alert Blinks Before the Load Is Dry
A blinking Damp Alert is a sorting opportunity during compatible Sensor Dry cycles, not a declaration that every item is dry.
Follow the checksDVE50A8600V Missing a Cycle? Check My Cycles
A hidden cycle may have been removed from the personal My Cycles list.
Follow the checksDV22N6800HW Heat Exchanger Alarm After Cleaning
This heat-pump dryer has a heat exchanger behind its own maintenance cover as well as a lint filter.
Follow the checksDV22N6800HW Water Tank Full With a Drain Hose Connected
Determine whether this heat-pump dryer is configured to collect condensate in its removable tank or to discharge it through the optional long drain hose.
Follow the checksDVE60M9900V Upper Delicate Dryer Leaves Items Damp
The upper Delicate Dryer is a small-load rack compartment; it does not load or tumble like the lower drum.
Follow the checksDVE45R6300V Remote Start: Smart Control Versus Smart Monitor
The R6300 electric dryer uses Smart Control for remote operation; the gas counterpart uses Smart Monitor.
Follow the checksDV50K7500EV Eco Dry Takes Longer: Compare the Actual Setting
Eco Dry changes the energy/time tradeoff on documented Normal and Time Dry selections.
Follow the checksDV42H5200 My Cycle Will Not Save: Short Press Versus Hold
A brief My Cycle press recalls a saved selection; holding it for more than three seconds saves the current course options.
Follow the checksDV45K6500EV Anti Static Unavailable: Check the Cycle
Anti Static is available only with NORMAL, HEAVY DUTY, PERM PRESS, DELICATES and TIME DRY in this manual.
Follow the checksDVE53BB8700 Display Language: Use Settings, Not Factory Reset
The cited control family has a direct Language setting.
Follow the checksDVE45T3400 Adjust Time Does Nothing on Sensor Dry
Adjust Time is for Manual Dry cycles on this family.
Follow the checksSamsung Dryer bE2 Returns With No Button Being Pressed
Samsung groups bE2 with stuck-button codes.
Follow the checksSamsung Dryer AC or AE: Internal Communication Versus Wi-Fi
AC/AE-family codes describe communication inside the dryer, not failure to connect the phone to a router.
Follow the checksSamsung Dryer FC or FE After a Restart
FC/FE are supply-frequency codes in Samsung’s US dryer guide.
Follow the checksSamsung Dryer 9C1 Within Five Seconds of Multi-Control Startup
First establish whether 9C1 appears through a stacked washer’s multi-control interface immediately after the washer is switched on.
Follow the checksSamsung Dryer C80 or C90 After the Vent Was Cleaned
C80/C90 and CLg/Cg are vent-test findings.
Follow the checksSamsung Dryer C1 or CL1 With an Empty Drum
C1/CL1 belongs to the vent-test setup check for laundry detected in the drum.
Follow the checksSamsung Dryer Ct During the Vent Test
Ct means the vent test cannot run under the current temperature condition.
Follow the checksSamsung Dryer dn: Do Not Interrupt the Update
dn indicates firmware downloading/installing, not an instruction to unplug the dryer.
Follow the checksDVE51CG8000 3C: Why a Generic Motor-Code List Is Not Enough
Use this family’s information-code table before buying a motor.
Follow the checksSamsung Dryer Filter Light Still Flashes After Cleaning
The filter reminder can appear even when the lint filter is already clean.
Follow the checksSamsung Dryer Vent Sensor: Solid Versus Blinking Icon
A vent sensor icon is an airflow-maintenance signal, not the same event as manually running a Vent Blockage Test.
Follow the checksSamsung Dryer Sensor-Bar Test: What the 0-to-1 Change Means
In Samsung’s documented Smart Install check, touching the moisture bars should change the display from 0 to 1.
Follow the checksMaytag Dryer L2 but the Drum Still Runs
Maytag says L2 can indicate low or missing supply voltage that prevents heating while the drum continues running.
Follow the checksMaytag Dryer AF After Cleaning: Check the Whole Exhaust Path
AF or Check Vent concerns restricted airflow.
Follow the checksMaytag Dryer PF After an Outage: Resume or Investigate?
PF indicates that a power failure interrupted drying.
Follow the checksMaytag Dryer F3 E2: Moisture Sensing, Not a Washer Code
For the dryer support page cited here, Maytag identifies F3 E2 with moisture sensing.
Follow the checksMEDB835DW Sensor Dry: Change the Saved Dryness Setting
MEDB835DW supports a saved Sensor Cycle dryness adjustment from standby.
Follow the checksMED7230HW Steam Refresh Leaves Wet Spots
Steam Refresh on MED7230HW is intended to refresh dry garments, not to dry a wet washer load.
Follow the checksMED6500MW Pet Pro Runs Without Heat: What Is Normal?
The MED6500MW Pet Pro option deliberately uses an extended no-heat period to lift hair into its XL lint trap.
Follow the checksMED6230HW Connects to the App but Will Not Start Remotely
Connecting MED6230HW to the app and authorizing remote control are separate steps.
Follow the checks